Skip to content

Knowledge that lights the world

Solar Panels at Home (Rooftop Solar): How They Work, What Affects the Cost and When They Pay for Themselves

As electricity bills rise, rooftop solar is on many homeowners’ minds. How solar panels work, the parts of a system, what affects output, grid-connected and battery systems, and questions to ask before deciding.

Solar Panels at Home (Rooftop Solar): How They Work, What Affects the Cost and When They Pay for Themselves

Solar panels convert sunlight directly into electricity using photovoltaic cells made of semiconductor materials such as silicon. The direct current produced by the panels is converted into the alternating current used at home by a device called an inverter. Over the past fifteen years panel prices have fallen dramatically, making rooftop systems affordable for homeowners in many countries.

Types of system

  • Grid-connected: Electricity from the panels is used at home first; any surplus goes to the grid and, depending on national rules, is credited against the bill or sold. This is the most common type.
  • Battery system: Surplus energy produced during the day is stored in batteries for use in the evening; it costs more but helps during power cuts.
  • Off-grid: Runs fully independently with batteries where the grid doesn’t reach.

What affects output

In the Northern Hemisphere, south-facing roofs tilted at roughly the latitude angle give the best results, though east and west are also usable. Shade from trees, chimneys or neighbouring buildings cuts output significantly. Panel efficiency falls somewhat in extreme heat, and regular cleaning prevents losses from dust and dirt. The annual hours of sunshine in your region are the main factor determining how much electricity a system will produce.

Cost and payback

Cost depends on system size (kilowatt-peak, kWp), the quality of panels and inverter, installation difficulty and whether there is a battery. Payback depends on electricity prices, household consumption, sunshine and the country’s net metering or feed-in rules, so it is not right to give a single figure. Getting written quotes from several installers that include an annual production estimate is the soundest approach.

Before deciding

  • Work out your electricity use over the past year from your bills.
  • Have the roof’s condition and remaining life checked.
  • Find out local permit procedures, grid connection rules and incentives; these change over time in many countries, including Türkiye.
  • Ask about the installer’s certifications, warranty terms and maintenance service.

Which panel type should you choose: monocrystalline, polycrystalline or thin film?

There are three panel types that you will most often come across in rooftop systems, and the difference between them comes mainly from how the cells are made. The right type depends on the size of the roof, the budget and the local climate.

  • Monocrystalline panels: Made with cells cut from a single silicon crystal. They produce more electricity per unit of area, which is why they stand out on small roofs. Today they are the most common type in the residential market.
  • Polycrystalline panels: Made by melting and fusing many crystals together. Their efficiency is slightly lower, so more space is needed to reach the same output.
  • Thin-film panels: Light and flexible but the least efficient; they are used on large surfaces and in special applications rather than on homes.

When comparing quotes, look not only at the panel output but also at the warranty period of the inverter and the accreditation of the installer.

Maintenance, panel lifespan and recycling at the end of life

Because solar panels have no moving parts, they need little maintenance; even so, dust, pollen and bird droppings can reduce output. According to studies by the US National Renewable Energy Laboratory (NREL) that compile field data, panel output falls by an average of about 0.5 per cent a year, which means a well-installed system can still deliver most of its original output after 25 years. The inverter, on the other hand, is usually the part that needs replacing before the panels, typically once during the life of the system.

Panels that reach the end of their life are also becoming an important issue. The International Renewable Energy Agency (IRENA) expects tens of millions of tonnes of panel waste worldwide by 2050; most of the glass, aluminium and silicon can be recovered. In the European Union, panels fall under electronic waste legislation. This article is for general information only; base your investment decision on current price quotes and local regulations.

Sources and further reading

  1. International Energy Agency (IEA), “Renewables” reports and solar cost analyses.
  2. U.S. Department of Energy, “Homeowner’s Guide to Going Solar”.
  3. IRENA, “Renewable Power Generation Costs” report.
  4. Jordan, D. C. and Kurtz, S. R. (2013). Photovoltaic Degradation Rates – An Analytical Review. NREL
  5. IRENA and IEA-PVPS (2016). End-of-Life Management: Solar Photovoltaic Panels
Share
Follow YulaHubGet the day's most important stories first.
RSS

Leave a comment

Your email address will not be published. Required fields are marked *