Saving energy often sounds like expensive appliance upgrades. In reality, a big part of your bill comes from small habits we repeat every day without noticing.
- Switch to LED bulbs. LEDs use far less energy than old incandescent bulbs and last for years.
- Turn off standby. TVs, game consoles and chargers still draw a little power when "off". A switched power strip makes this easy.
- Lower the thermostat by one degree. Reducing the indoor temperature by a degree in winter makes a noticeable difference to heating costs.
- Keep radiators clear. Furniture and heavy curtains stop heat from spreading into the room.
- Seal gaps around doors and windows. Simple foam strips reduce heat loss.
- Wash full loads at lower temperatures. Most of a washing machine's energy goes into heating water.
- Run the dishwasher on eco mode. It takes longer but uses less energy.
- Put a lid on the pot. Cooking with a lid boils faster and saves energy.
- Don't push the fridge against the wall. Letting the coils at the back breathe improves efficiency.
- Air rooms briefly and fully. Opening windows wide for 5–10 minutes refreshes the air and keeps heat in better than leaving them ajar for hours.
Each step may look small on its own; together they make a real difference to both your budget and the environment.
Where does most of the energy at home go?
Knowing where energy is used at home before you start saving helps you direct your effort to the right place. According to data from Eurostat, the statistical office of the European Union, about two-thirds of households' final energy consumption in the EU goes on space heating. Water heating takes roughly one seventh, while lighting and electrical appliances take a similar share; cooking accounts for a smaller share. In Türkiye the proportions may differ because climate, housing type and heating method vary from region to region, but the overall picture is similar: in the cold months, heating drives most of the bill. That is why small improvements to radiators, the boiler and insulation can make a much bigger difference than changing light bulbs. In summer, appliances that run all the time, such as air conditioners and fridges, come to the fore. Focusing on the big items first and then adding small habits is the most efficient order.
How to read an energy label
When you buy a new household appliance or television, the energy label is the most practical tool for seeing how much electricity it will use over the years. In 2021 the European Union rescaled the labels for fridges, washing machines, dishwashers, televisions and displays; the old plus classes such as A+++ were removed and a simple scale from A to G was restored. With this change most products moved down to a lower letter, so on the new label a B or C class appliance can be as efficient as an A+++ appliance on the old one. Next to the letter, the label shows consumption in kilowatt-hours per year or per set amount of use; looking at this figure is the more accurate way to compare. The QR code on the new labels leads to detailed information about the product in the EU product database. Similar labelling rules are applied in Türkiye.
Smart heating settings: boiler, radiators and thermostat
Because heating is the item that drives the bill most, the settings here matter. Having the boiler serviced by an authorised technician every year before the heating season helps it run both safely and efficiently. If the top of a radiator is cold and the bottom is hot, there may be air trapped inside; bleeding the radiators lets the heat spread evenly into the room. Thermostatic radiator valves let you set the temperature of each room separately; keeping unused rooms cooler prevents unnecessary heating. If you use a room thermostat, you can set a schedule that lowers the temperature slightly at night and when nobody is at home. Reflective panels placed behind radiators bounce some of the heat back into the room, especially on uninsulated external walls. Most of these steps are low-cost, and the difference can be noticed within a single season.
Hot water: showers, boiler settings and flow
Heating water is one of the largest energy items at home after space heating. Cutting a few minutes off your shower is the most direct way to save both water and energy. Low-flow shower heads reduce the amount of water flowing per minute without greatly reducing comfort. If your boiler has a hot water temperature setting, not keeping it higher than necessary reduces both energy use and the risk of scalding. Aerators fitted to taps mix air into the water, keeping the feel of the flow while lowering consumption. In homes with an electric water heater, running it according to when hot water is needed rather than leaving it on all the time can reduce unnecessary heat loss. Insulating exposed sections of hot water pipes also stops heat being lost on the way. These small changes can make a noticeable difference to the monthly bill, especially in larger households.
Standby mode and hidden consumers
Appliances that keep drawing power from the socket even though they look switched off make up a share of the bill that goes unnoticed but never goes away. Thanks to the European Union's ecodesign rules, the standby consumption of many new appliances sold since 2013 has been limited to very low levels such as half a watt. However, older appliances at home, routers, satellite receivers, games consoles and adapters left permanently plugged in can still use energy all day. An easy way to find out how much each device draws is to measure it for a few hours with a simple plug-in energy meter. Grouping devices that can be switched off completely when not in use on a switched power strip is the same as unplugging them all with one movement. For devices such as a router that need to stay on, choosing new and efficient models makes more sense.
Read your bill and track your progress
The best way to see whether your saving steps are working is to read the bill not just as an amount but as consumption. An electricity bill shows consumption in kilowatt-hours, and a gas bill in cubic metres or kilowatt-hours. Because prices change over time, amounts can be misleading; comparing the quantity consumed with the same month last year is therefore more meaningful. Reading the meter on the same day each month and writing it in a simple table lets you see how much effect each change has had. If consumption rises unexpectedly, a faulty appliance, a dripping hot tap or a wrongly set thermostat should come to mind. Many distribution companies and suppliers also show your consumption history online. Improving what is measured is always easier than improving what is not.
Sources and further reading
- Eurostat, "Energy consumption in households" (Statistics Explained)
- European Commission, "Energy label and ecodesign" information pages
Leave a comment
Your email address will not be published. Required fields are marked *