Skip to content

Knowledge that lights the world

How to Clean a Washing Machine: Bad Smells, the Filter, the Door Seal and the Detergent Drawer

How do you clean a washing machine and why does it smell? Drum-clean programme, pump filter and door seal cleaning, the detergent drawer, how often to clean, and the warning never to mix vinegar and bleach.

How to Clean a Washing Machine: Bad Smells, the Filter, the Door Seal and the Detergent Drawer

People usually ask how to clean a washing machine when it starts to smell. Yet the machine needs regular care too: detergent residue, lint and moisture building up in the door seal, the detergent drawer and the filter eventually lead to mould and bad smells. A few simple steps can get rid of the odour and extend the life of the machine.

Why does a washing machine smell?

The most common causes are frequent low-temperature washes, using too much detergent and fabric softener, and shutting the door straight after a wash. Moisture left inside combines with residue to create a good environment for bacteria and mould.

Step-by-step washing machine cleaning

  1. Door seal: Wipe the folds of the rubber seal with a damp cloth and remove lint, hair and small items. If there are mould stains, use a cleaner recommended by the manufacturer and dry the seal thoroughly.
  2. Detergent drawer: Remove the drawer if you can and clean it with warm water and an old toothbrush; wipe inside its housing too.
  3. Drum: If your machine has a “drum clean” programme, use it. If not, run an empty wash at the highest temperature, using the machine cleaner recommended by the manufacturer or the product named in the manual.
  4. Pump filter: Usually behind a small flap at the bottom front. Place a container and a towel underneath and open the filter slowly; once the water has drained, remove lint, coins and other objects. Do this with the machine cold and unplugged.
  5. Outside: Wipe the body and control panel with a slightly damp cloth.

Important safety warning

Never use vinegar and bleach (chlorine-based products) together or one after the other in the same wash. The mixture can release toxic chlorine gas. Frequent, heavy use of vinegar may also damage rubber parts in some machines; follow your machine’s manual when choosing a cleaning product.

Habits that prevent bad smells

  • Leave the door and detergent drawer ajar for a while after every wash.
  • Use detergent according to the dose on the pack; more does not mean cleaner, just more residue.
  • Do not leave wet laundry sitting in the machine.
  • Run an empty cleaning wash once a month.

Vinegar, baking soda or a ready-made cleaner?

The most common home methods are vinegar and baking soda. Vinegar helps dissolve limescale and soap residue, while baking soda helps reduce odours. Even so, your machine’s user manual always comes first: some manufacturers warn that frequent use of vinegar can wear rubber seals and hoses over time, and recommend their own descalers or machine cleaners instead. When using a ready-made machine cleaner, follow the product instructions and never mix different cleaning products together.

Limescale and hard water

In hard-water areas, limescale builds up over time in the drum, on the heating element and in the hoses. Limescale can make the machine use more energy and shorten its life. Many users run a monthly maintenance wash on an empty machine at a high temperature with a descaler approved by the manufacturer. Products containing citric acid are also widely used, but again follow the manual for the amount and frequency.

A washing machine maintenance schedule

  • After every wash: Take the laundry out straight away and leave the door and drawer ajar.
  • Once a week: Wipe the door seal and its folds with a dry cloth.
  • Once a month: Remove and wash the detergent drawer and run a hot maintenance wash on an empty machine.
  • Every three months: Clean the pump filter and check the inlet hoses for cracks or leaks.

Front-loading and top-loading machines

  • Front-loaders: Because the door seal traps water and dirt, mould and odour problems are more common in these machines; wiping the folds of the seal regularly is important.
  • Top-loaders: With the lid on top, seal problems are less common, but dirt can build up around the upper rim of the drum and under the lid.
  • Washer-dryers: The filter and air ducts in the drying section should also be cleaned at the intervals given in the manual.

Whatever type of machine you have, taking the laundry out promptly after a wash and leaving the door and detergent drawer ajar for a while lets the inside dry. If you have small children or pets at home, keep an eye on a door left open.

How does washing at low temperatures affect the machine?

Washing clothes at 30–40 degrees to save energy is a good habit. However, when the machine always runs at low temperatures and on short programmes, detergent and fabric softener residues can build up around the drum and in the hoses. These residues make it easier for biofilm, a thin and sticky layer where bacteria cling, to form, and this is one of the common causes of bad smells. For this reason, many manufacturers recommend running the empty machine on a high-temperature maintenance programme once a month. Using fabric softener sparingly also reduces build-up. Follow the user manual for the temperature and programme suitable for your machine.

Frequently asked questions

How often should a washing machine be cleaned?

A quick weekly wipe of the seal and drawer, an empty cleaning wash once a month and a filter clean every few months is enough for most homes.

Can I clean it with baking soda?

Some people do, but it may not suit every machine. The safest approach is to follow the manual’s recommendation.

What happens if the filter is never cleaned?

A clogged filter can slow draining, cause smells and make the machine show an error.

Should you leave the washing machine door open?

Yes, leaving the door and detergent drawer ajar for a while after a wash helps the inside dry and reduces mould. Take care if you have small children or pets.

Can citric acid remove limescale from a washing machine?

Citric acid is widely used to dissolve limescale, but check your user manual to see whether it suits your machine and how much to use.

Sources and further reading

  1. American Cleaning Institute, “Clean Your Washing Machine” (cleaninginstitute.org)
  2. Which? (UK), “How to clean a washing machine” (which.co.uk)
  3. Good Housekeeping Institute, “How to clean a washing machine” (goodhousekeeping.com)
  4. Which? (UK), "How to clean a washing machine" guide
Share
Follow YulaHubGet the day's most important stories first.
RSS

Leave a comment

Your email address will not be published. Required fields are marked *