In many homes internet problems come not from the line but from the wireless network inside the house. Wi-Fi signals are weakened by walls, metal objects and other devices. Fortunately, a few simple changes can noticeably improve speed and coverage.
First, diagnose the problem
Connect your computer to the router with a cable and run a speed test. If the wired speed is close to your plan, the problem is your home Wi-Fi. If the wired speed is also low, you need to contact your internet provider.
10 practical tips
- Move the router to the centre of your home. A router in a corner, inside a cabinet or behind the TV unit wastes much of its signal.
- Choose a high, open spot. Signals tend to spread downwards; put the router on a shelf or on top of a cupboard.
- Keep it away from obstacles. Thick concrete walls, mirrors, metal objects, aquariums and microwave ovens weaken the signal.
- Use the right frequency. The 5 GHz band is faster in rooms near the router; 2.4 GHz reaches further and through walls better. Newer routers can steer devices to the right band automatically.
- Change the channel. In apartment blocks neighbouring networks can clash on the same channel. Turn on automatic channel selection in the router settings or choose a less crowded channel.
- Update the firmware. Router updates improve both performance and security.
- Restart it. Routers left on for a long time can slow down; restarting occasionally helps.
- Use cables. Connect fixed devices such as the TV, games console and desktop computer by cable where possible; this frees up Wi-Fi for other devices.
- Consider a mesh system for large homes. Mesh Wi-Fi systems made of several units cover the whole home under a single network name and usually work better than classic range extenders.
- Protect your network. Change the default router and Wi-Fi passwords and use WPA2 encryption, or WPA3 if supported. Unauthorised users affect both your speed and your security.
2.4 GHz, 5 GHz and 6 GHz: which band and when?
Most modern routers broadcast on more than one frequency band at the same time. Which band each device connects to directly affects the speed you experience.
- 2.4 GHz: Passes through walls better and reaches further, but it is slower and suffers more interference from neighbouring networks, Bluetooth devices and microwave ovens. It suits smart home devices in distant rooms.
- 5 GHz: Much faster and less crowded, but with a shorter range. It is ideal for laptops and TVs in the same room as the router or the next one.
- 6 GHz: The newer band that arrived with Wi-Fi 6E and Wi-Fi 7; it offers the widest and cleanest channels, but has the shortest range and can only be used by compatible devices.
How to run a speed test properly
Judging from a single speed test can be misleading. First connect a computer to the router with a cable and test: if the speed is low over the cable, the problem is not Wi-Fi but your internet line, and you need to contact your provider. If the cable speed is good, repeat the same test over Wi-Fi next to the router and then in the problem room; the difference shows how much the wireless network is losing. Run tests at different times of day with no downloads in the background, and also check the latency (ping): for video calls and gaming, low latency matters more than raw speed.
Frequently asked questions
Do I need a new router?
If your router is several years old and does not support newer Wi-Fi standards (such as Wi-Fi 6), a new device can make a clear difference, especially in homes with many connected devices. But it makes sense to try the free steps above first.
Sources and further reading
- Wi-Fi Alliance, information pages on Wi-Fi 6 and WPA3.
- UK Ofcom, “Get the best from your broadband” guidance.
- Wi-Fi Alliance – Wi-Fi 6E and Wi-Fi 7
- Ofcom – Tips to improve your broadband and Wi-Fi
Leave a comment
Your email address will not be published. Required fields are marked *