Each generation of mobile communications enabled a new way of using phones: 2G brought text messages, 3G mobile internet, 4G the era of video and apps. 5G, defined by international standards bodies, opened its first commercial networks in 2019. The aim is not just faster phones but connecting billions of devices, from factories to cars, reliably and with low latency.
How it differs from 4G
- Speed: In good conditions it can reach gigabit-per-second levels; real speed depends on the operator, frequency and distance from the base station.
- Latency: The delay in data transmission can fall to a few milliseconds, important for remote control and real-time applications.
- Capacity: Far more devices can connect at once in the same area, noticeable in crowded places such as stadiums and concerts.
Frequency bands
Bands below 6 GHz offer wide coverage and a clear speed increase over 4G. Very high frequencies known as millimetre wave offer very high speeds but work over short distances and pass poorly through obstacles such as walls, so they are usually used in dense city centres.
Health concerns
5G also uses radio waves, which are non-ionising, meaning they do not carry the kind of energy that can damage DNA. In 2020 the International Commission on Non-Ionizing Radiation Protection (ICNIRP) published updated limits covering 5G frequencies. The World Health Organization says there is no evidence that mobile networks harm health at exposure below these limits, and research continues. Claims spread during the pandemic that “5G spreads viruses” have no scientific basis.
What do you need to use it?
You need a 5G-capable phone, 5G service from your operator and coverage where you are. You can check the network type in settings; because 5G can use somewhat more battery, some phones switch to 4G automatically when it isn’t needed.
5G is not just about speed: three usage scenarios
When defining 5G, the International Telecommunication Union (ITU) set out three main usage scenarios. The faster speeds felt on phones are only one of them:
- Enhanced mobile broadband: High-resolution video and more stable connections in crowded stadiums and squares.
- Ultra-reliable low-latency communication: The ITU target for such connections is latency of around 1 millisecond; this matters for remotely controlled machines and industrial automation.
- Massive internet of things: The target is up to one million devices per square kilometre, allowing smart meters and sensors to work at the same time.
These targets show the network's design limits; the values you see in everyday use vary according to the operator, the frequency and where you are.
Standalone (SA) and non-standalone (NSA) 5G
Most early 5G networks were built in a “non-standalone” (NSA) form: the phone uses a 5G radio connection, but the core of the network is still 4G infrastructure. This approach allowed 5G to spread quickly. In “standalone” (SA) 5G, the core network is also specific to 5G. The SA design offers lower latency and features such as “network slicing”, which lets an operator create, for example, a virtual network reserved for emergency services on the same physical network. The 5G icon on your phone does not always show which type of network you are connected to.
Network Infrastructure and Deployment Strategies
New generation connectivity technologies require an infrastructure approach that differs significantly from traditional base stations. Because high-frequency signals tend to be affected by physical obstacles and have shorter ranges, the network must be deployed much more densely. This necessitates the use of numerous small cells strategically placed throughout cities, alongside large towers that provide wide coverage.
Small cells are used to maintain signal strength and keep data transmission speeds at a stable level. This dense network structure ensures that signals reach users without being blocked by buildings or trees. Consequently, connection quality is preserved in areas with high population density and heavy device usage. This strategy expands the coverage area while also significantly increasing the total data capacity.
Network Slicing and Virtualization
Network slicing is the process of dividing a physical network into logical segments according to different service requirements. Through this technology, virtual networks with entirely different characteristics can be created over a single physical infrastructure. Each slice is specially configured to have its own latency, speed capacity, and reliability level.
- High-priority channels reserved for emergency and public services.
- Broadband slices optimized for video streaming and high-resolution content.
- Connections designed for low-power, long-term connected sensors.
- Critical control paths for error-intolerant industrial robotic systems.
This virtualization capability allows operators to utilize network resources much more efficiently. The unique needs of different sectors and usage scenarios can be met without negatively affecting the overall performance of the main network. In this way, each part of the network operates in the most suitable manner for its intended use, maximizing efficiency.
Edge Computing and Data Processing
Edge computing technology plays a critical role in minimizing data transmission latency. In traditional methods, data is sent to central and remote servers, processed there, and then returned to the user. However, in new generation networks, the data processing process is moved to points much closer to the user or the device, shortening this cycle.
Processing data at a point close to its source significantly reduces response times. This is vital for autonomous systems that require instant decision-making and complex processes that require real-time data analysis. Edge computing helps lighten the total load on the network while assisting in the faster, more stable, and more reliable management of data.
Cybersecurity and Authentication
The massive increase in the number of connections requires cybersecurity protocols to be much more complex and robust. Since each new device joining the network can pose a potential security risk, protection mechanisms have been enhanced. Therefore, new generation systems use advanced encryption methods to authenticate devices and protect data traffic.
Security layers continuously monitor not only the content of the data but also the movements of devices on the network. Strengthening authentication processes prevents unauthorized access and cyberattacks. This comprehensive security approach is a fundamental requirement for protecting both individual user privacy and critical societal infrastructures.
Smart Cities and Industrial Automation
New generation mobile networks are considered the cornerstone of modern smart cities. Many areas, from traffic management systems to waste management, energy distribution, and public safety, become more efficient and sustainable thanks to this connectivity technology. The continuous and uninterrupted communication between objects in a city allows for the optimization of urban resources.
In the industrial field, production processes can become fully digitized thanks to the high reliability and low latency offered by these networks. Errorless communication between machines in factories and central control systems reduces production errors and increases overall efficiency. This deep integration represents a new era of digital transformation in industrial production.
Global Compatibility and Standards
The establishment of international standards is essential for mobile communication technologies to work seamlessly worldwide. The use of the same technical protocols by operators and device manufacturers in different countries enables the formation of a global ecosystem. These standards guarantee that devices can work in different geographies and that networks are fully compatible with each other.
International organizations closely follow the development of technology and publish constantly updated technical requirements and protocols. This process allows the technology to not remain limited to certain regions but to spread throughout the world and rise on a common technological ground. Standardization is one of the most important elements that paves the way for innovation on a global scale.
Sources and further reading
- 3GPP, “5G System Overview”.
- ICNIRP, “Guidelines for Limiting Exposure to Electromagnetic Fields (100 kHz to 300 GHz)”, Health Physics, 2020.
- World Health Organization (WHO), “Radiation: 5G mobile networks and health” Q&A.
- ITU-R M.2083 (2015), IMT Vision – IMT-2020 usage scenarios
- ITU-R M.2410 (2017), Minimum requirements related to technical performance for IMT-2020
Leave a comment
Your email address will not be published. Required fields are marked *